Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 01047 | |
Number of page(s) | 7 | |
Section | Environment Saving Mining Technologies | |
DOI | https://doi.org/10.1051/e3sconf/201910501047 | |
Published online | 21 June 2019 |
Justification of the Relationship of Production Capacity and the Parameters of the Blocks at Surface Mining of Existing Kuzbass Quarry Fields
1
T.F. Gorbachev Kuzbass State Technical University, Department of open pit mining, 650000 Kemerovo, 28 Vesennya st., Russian Federation
2
JSC “NC VostNII”, 650002, 3 Institutskaya Str., Kemerovo, Russia
* Corresponding author: sav.ormpi@kuzstu.ru
Today, up to two-thirds of the world’s minerals are mined in an open, more economical way. However, at the same time, billions of tons of overburden are extracted, which are piled in the dumps, where they are polluted, lose their value and, in addition, reduce the quality of the environment. The possibility of industrial use of various rocks of from quarry field characterizes the complexity of minerals extracted by surface mining. Currently, there are no clear criteria for determining the size of blocks when designing enterprises for open pit mining. In most cases, when designing open pit mines, a quarry field is conventionally divided into several blocks, which does not always ensure the optimal production capacity of the mining enterprise due to the uneven distribution of reserves in the block contours. Because of that, during the transition from one block to another, a decrease in the production capacity of the enterprise can be noted. To avoid productivity decreasing, the precise analysis of the block parameters must be performed.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.