E3S Web Conf.
Volume 105, 2019IVth International Innovative Mining Symposium
|Number of page(s)||6|
|Section||Environment Saving Mining Technologies|
|Published online||21 June 2019|
Research in the Impact of Dynamic Loads for the Development of Pentice Designs when Sinking Skip Shafts
T.F. Gorbachev Kuzbass State Technical University, 650000, 28 street Vesennyaya, Kemerovo, Russian Federation
In order to protect workers engaged in shaft sinking works artificial protective equipment (buntons) with the support element from powerful I-beams or truss structures are used. They have to withstand enormous push loading, be strong, simple in design, have less labor input during construction and dismantling. Under shaft sinking in case of skip operational winding performance, a protective bunton can be exposed to the rock mass flow in the event of an emergency full skip run. To substantiate the variables and develop the design of pentices when sinking an active hoisting shaft, the skip falls time dependence on the changes in its fall height, taking into account the velocity and the air stream direction in the shaft, was established using mathematical modeling. LLC “SibGorComplexEngineering” together with the Department of Construction of Underground Structures and Mines of T.F. Gorbachev Kuzbass State Technical University have developed several new designs variants of protective buntons for vertical shafts sinking in case of operational winding performance. It is a Z-shaped structure of the offset in height, parallel to each other of upper and lower protective buntons, bushed with sloped reflective metal sheets and it is interconnected by a vertical division wall.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.