Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 01060 | |
Number of page(s) | 7 | |
Section | Environment Saving Mining Technologies | |
DOI | https://doi.org/10.1051/e3sconf/201910501060 | |
Published online | 21 June 2019 |
Conditions of Geotechnological Feasibility of Mineral Reserves
1
Technical University of Kosice, Faculty of Mining, Ecology, Process Control and Geotechnologies, Letná 9, 04200 Kosice, Slovak Republic
2
T.F. Gorbachev Kuzbass State Technical University, 650000 28 Vesennya st., Kemerovo, Russia
* Corresponding author: radim.rybar@tuke.sk
The evaluation of a deposit and mining project is a continuous process rather than a single act. Changes in budget, evaluation criteria, or in the area of costs and incomes may change results valid up to now and the views on using a deposit. Geological quantities are measurable with the help of geological conclusions and engineering calculations. Raw material reserves and their quality are defined as a substance that can be recovered with profit through current technologies and prices. This definition can result in two misunderstandings: geological reserves and the quality of raw materials are understood as variables not connected with mining activities. However, the quantity and quality of remaining reserves depends on changes in our geological knowledge, changing economic conditions, as well as on the exhaustion of reserves. The quantity of reserves and value of the cut-off grade depends not only on geological factors but also upon the methods of deposit extraction, costs and prices.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.