Issue |
E3S Web Conf.
Volume 110, 2019
International Science Conference SPbWOSCE-2018 “Business Technologies for Sustainable Urban Development”
|
|
---|---|---|
Article Number | 01039 | |
Number of page(s) | 6 | |
Section | Energy Efficiency in the Construction | |
DOI | https://doi.org/10.1051/e3sconf/201911001039 | |
Published online | 09 August 2019 |
Simulation of thermal field dynamics in the erected reinforced concrete structure
Moscow state University of civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: inferno1020@mail.ru
During the heat treatment of concrete, temperature field in the structure can be controlled by changing the initial concrete temperature, the heating power of the heating elements, and heat transfer conditions at the surface of the structure. There is the task of finding such heat treatment mode in which the temperature field has the desired characteristics. These characteristics include temperature, rate of rise and temperature gradient. The first step in the solution of the heat treatment operation problem is to create a sufficient point of a mathematical model of the temperature field in the hardening concrete. The second stage should be devoted to the numerical solution of the equations of the model, which allows a computer to determine the temperature field in hardening concrete structure. With this method, you can use a computer to study the dynamics of the temperature field at various modes of heat treatment and to develop the most rational modes without the need for a large series of scientific experiments. For the numerical solution of model equations, a locally one-dimensional scheme of the method of full approximation is applied. This scheme is economical, relatively simple to program, does not require a lot of memory, and allows performing calculations on a computer.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.