E3S Web Conf.
Volume 111, 2019CLIMA 2019 Congress
|Number of page(s)||8|
|Section||Advanced HVAC&R&S Technology|
|Published online||13 August 2019|
Numerical approach regarding functional and design optimization for a residential building heating system composed by heat pump and auxiliary
Faculty of Building Services, Technical University of Civil Engineering of Bucharest, Bucharest, Romania
* Corresponding author: email@example.com
In this paper is presented the physical model and mathematical approach which describe the equation system used in system calibration and design optimization. The system proposed for study is built from heat pump, for energy demand delivery, together with auxiliary heating source to face in all low temperature days, when heat pump work at maximum load but the required demand by the building is higher. The paper present few of the common used systems in market for which the mathematical equation system will be proposed to come in help designers for in simulation and cost optimization. Simulation of proposed design is realized and results are delivered. The system construction, is optimized by comparison study of design and simulation data for each system type proposed. The comparison study is used for cost estimation of system and energy balance.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.