| Issue |
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
|
|
|---|---|---|
| Article Number | 06061 | |
| Number of page(s) | 2 | |
| Section | Sustainable Urbanization and Energy System Integration | |
| DOI | https://doi.org/10.1051/e3sconf/201911106061 | |
| Published online | 13 August 2019 | |
Mock-up Test of Time Lag in Floor Heating Systems with PCM
1,2 Graduate School, Chung-Ang University, 06974, Korea
3 School of Architecture and Building Science, Chung-Ang University, 06974, Korea
* Corresponding author: jincpark@cau.ac.kr
This research analyzes the time lag, which is a thermal storage performance parameter, when a phase change material is applied to the floor heating system of a mock-up laboratory. The following results are obtained. In terms of the time required for the floor surface temperature to reach 30 °C, the time lag of Room 2 (i.e., the room with the PCM-based floor system) was observed to be 15 min. Additionally, in terms of the time required for the floor surface temperature to decrease to 22 °C, Room 2 exhibited a time lag of 5 h 2 min. Therefore, the study concluded that longer time lags are observed with floor heating systems with PCM.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.