Issue |
E3S Web Conf.
Volume 112, 2019
8th International Conference on Thermal Equipment, Renewable Energy and Rural Development (TE-RE-RD 2019)
|
|
---|---|---|
Article Number | 03017 | |
Number of page(s) | 8 | |
Section | Rural Development | |
DOI | https://doi.org/10.1051/e3sconf/201911203017 | |
Published online | 20 August 2019 |
Researches on drying the clover through aeration to obtain hay
INMA Bucharest, Romania
* PhD. Stud. Eng. Ana Zaica: zaica_ana@yahoo.com
Harvesting, preparation and conservation of hay is a frequent method for harvesting fodder from grasslands and forage crops, especially from the hill and mountain areas. The greatest losses of nutrients are obtained by traditional drying on the stubble of the hay. These losses are in the case of unfavourable weather even at 50 ... 60%, the drying time increasing to over 6 ... 8 days. This paper presents the results of the experimental researches achieved within a new technology for shortening the time from harvesting the clover to obtaining the hay at storage humidity. A pilot ventilation installation with a monitoring and control system for working processes was used to carry out the research. During the experiments, the parameters of the aeration agent were measured: temperature and humidity, as well as clover mass characteristics: humidity, temperature, drying uniformity.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.