Issue |
E3S Web Conf.
Volume 113, 2019
SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1
|
|
---|---|---|
Article Number | 03007 | |
Number of page(s) | 8 | |
Section | Energy Micropolygeneration and Harvesting | |
DOI | https://doi.org/10.1051/e3sconf/201911303007 | |
Published online | 21 August 2019 |
A Review on Combining Micro Gas Turbines with Organic Rankine Cycles
1
Department of Turbomachines, Aeronautic Institute of Technology, 12228-900 São José dos Campos/SP, Brazil
2
Thermochemical Power Group, University of Genoa, 16145 Genoa/LIG, Italy
* Corresponding author: gusbonolocampos@gmail.com
Current energy conversion machines such as the micro gas turbine can be improved by harvesting the low-grade energy of the exhaust. A prominent option for such is the organic Rankine cycle due to its relatively efficient and reliable design. This manuscript presents a review on the subject and is the first step toward the design of an organic Rankine cycle bottoming a 100 kWe recuperated gas turbine. After introducing and covering the historical development of the technology, appropriate guidelines for defining the cycle arrangement and selecting the fluid are presented. At last, the viability of the cycle is assessed by assuming an appropriate efficiency value and general cost functions. The organic Rankine is expected to generate an additional 16.6 kWe of power, increasing the electrical efficiency from 30 to 35%. However, the capital cost increase was estimated in 48%.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.