Issue |
E3S Web Conf.
Volume 115, 2019
2019 The 2nd International Conference on Electrical Engineering and Green Energy (CEEGE 2019)
|
|
---|---|---|
Article Number | 02005 | |
Number of page(s) | 4 | |
Section | Energy System | |
DOI | https://doi.org/10.1051/e3sconf/201911502005 | |
Published online | 02 September 2019 |
Kinetic Energy Harvesting from Human Hand Movement by Mounting micro Electromagnetic Generator
Department of Electrical & Electronic Engineering, Kaunas University of Technology-KTU, Lithuania.
Faculty of Sciences and Engineering, East West University, Bangladesh.
Department of Electrical Engineering, N.E.D University of Engineering & Technology, Pakistan.
* Corresponding author: frpathan@yahoo.com
A comprehensive review of design and experimentation is presented in this research paper on sustainable renewable energy scavenging from Human body movement using Micro electromagnetic kinetic energy harvester to powering wearable, portable electronics, implantable medical devices etc. The body location which is chosen as the harvester is human hand between elbow and shoulder. Human body harvest energy in two ways i,e, mechanical energy and thermal energy. Mechanical energy is of two kinds one is static energy and the other one is kinetic energy. Due to motion or displacement or enforcement excitation the kinetic energy is extracted. The electric charges which remains imbalance on the surface or within a material is static energy. Thermal energy is extracted from the dissipation of heat from human body. Human body parts and organs generate energy through two types of activities are voluntary and involuntary. The energy which are produced by voluntary activities are high as people intentionally does work by body motion, walk, run. The generated energy by involuntary organs like heart, breathing, artery are smaller compare to voluntary energy harvesting. One process of energy harvesting is by use of micro electromagnetic generator, flexible and stretchable piezoelectric, triboelectric, electromagnetic induction, PVDF cantilever mounting on human body. The harvester prototype is cylindrical magnet L40xD10 mm size which is mounted on human hand for energy harvesting. While in movement of hand the produced wave forms by magnetic generator are measured and recorded for calculation. Analyzing the received data it has been found that the generated power by micro electromagnetic vibration generator from movement of human hand are 319 RMS μW and 2.48 RMS mV with a frequency of 0.25 Hz and power density of about 2.48μW/cm³.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.