Issue |
E3S Web Conf.
Volume 116, 2019
International Conference on Advances in Energy Systems and Environmental Engineering (ASEE19)
|
|
---|---|---|
Article Number | 00071 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/e3sconf/201911600071 | |
Published online | 24 September 2019 |
Characteristics of Oder river water temperature for heat pump
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
* Corresponding author: ara.sayegh@pwr.edu.pl
Currently there is increasing interest in using surface water bodies as renewable energy sources for year around or seasonal heating and cooling applications e.g. heat pumps. This paper presents the statistical analysis of average water temperature and the flow rate of the Oder River. Linear regression analysis was carried out on the base of ten years (2005–2014) diurnal water temperatures measurements data. The results determine the relation between average air temperature in Wroclaw and Oder river water average temperature for two analysed locations. The Pearson's r correlation coefficients were determined. Additionally, the variability of water flow rates from 2008–2010 in the annual cycle were illustrated. The article proposes the conceptual framework for surface water bodies technical aspects. This proposition is the first step for wider analysis in order to identify the thermal potential of the Oder river water as heat source for heat pumps.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.