Issue |
E3S Web Conf.
Volume 118, 2019
2019 4th International Conference on Advances in Energy and Environment Research (ICAEER 2019)
|
|
---|---|---|
Article Number | 02028 | |
Number of page(s) | 6 | |
Section | Energy Equipment and Application | |
DOI | https://doi.org/10.1051/e3sconf/201911802028 | |
Published online | 04 October 2019 |
Emission Character Study on temperature Combustion Performance of Electronic Controlled Diesel Engine Mixed with Butanol
1
Marine Engineering Institute, Jimei University, Xiamen 361021, China
2
Fujian Provincial Key Laboratory of Naval Architecture and Ocean Engineering, Xiamen 361021, China
3*
School of Science, Jimei University, Xiamen 361021, China
* Corresponding author: zxhuang@jmu.edu.cn
In this paper, through the electromechanical control modification of 4190 ZLC-2 diesel, the electronic fuel injection model is established by AMESim simulation software, and the high pressure circulation model of butanol/diesel dual fuel engine is established by AVL-FIRE software, the appropriate initial parameters module and corresponding boundary conditions are set. At the condition of low-temperature combustion through exhaust gas recirculation (EGR), in the optimization scheme studying the influence of butan blending ratio and EGR rate on diesel engine emissions. The result shows that the addition of butanol can improve the low temperature combustion, reducing the formation of CO and soot. The introduction of EGR can achieve low temperature combustion and significantly reduce NO emissions. The optimal parameter set for parameter matching is obtained: B20/EGR12.5 %.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.