| Issue |
E3S Web Conf.
Volume 118, 2019
2019 4th International Conference on Advances in Energy and Environment Research (ICAEER 2019)
|
|
|---|---|---|
| Article Number | 03011 | |
| Number of page(s) | 5 | |
| Section | Environment Engineering, Environmental Safety and Detection | |
| DOI | https://doi.org/10.1051/e3sconf/201911803011 | |
| Published online | 04 October 2019 | |
Parametric design process basing on building physical performance
Welsh School of Architecture, Cardiff University, UK
* Corresponding author: liy209@cardiff.ac.uk
The purpose of this research is to investigate general workflow of parametric architecture design basing on building physical performance. Earlier study on parametric design have shown that this method can effectively improve quality and diversity in terms of architecture appearance. In addition, design time could also be saved in this way. Nevertheless, research about parametric design on building configuration basing on building physical performance is still insufficient. Hence, this study investigates the specific workflow of parametric design in the basis of building performance. The result show that whole workflow can be divided into three steps:1) variables input 2) objective function determination 3) optimization operation. Combination of different component conducts in every step and realize final optimal scheme.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.