| Issue |
E3S Web Conf.
Volume 118, 2019
2019 4th International Conference on Advances in Energy and Environment Research (ICAEER 2019)
|
|
|---|---|---|
| Article Number | 03023 | |
| Number of page(s) | 4 | |
| Section | Environment Engineering, Environmental Safety and Detection | |
| DOI | https://doi.org/10.1051/e3sconf/201911803023 | |
| Published online | 04 October 2019 | |
Study on the change of organic matter along the Processes of Drinking Water Plant
Shanghai Municipal Engineering Design Institute (Group) Co.Ltd., 200092 Shanghai, P.R.China
* Corresponding author: zhangshuo@smedi.com
According to contaminated raw water and drinking water purification processes, volatile/semi-volatile organic compounds in water are determined by GC-MS. The changes of the organic along the process and water quality from unsafe to safe process were revealed. The results show that there are odorous substances such as heptanal in raw water, which are not detected after the filtration. The composition of volatile organic compounds changes a lot after the ozone activated carbon process, thus anthropogenic pollutants are no longer detected such as 5-ethyl-5-(3-hydroxy isopentyl)-barbituric acid. However, biological metabolites that are not present in raw water such as cedrenol appear. Except disinfection by-products after disinfection, there are a variety of halogenated compounds as 1-1-dichlorocyclobutane and 1-chloro-3, 3-dimethyl-butane. Some hydrocarbons and alcohols in the finished water have little impact on drinking water safety.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.