| Issue |
E3S Web Conf.
Volume 118, 2019
2019 4th International Conference on Advances in Energy and Environment Research (ICAEER 2019)
|
|
|---|---|---|
| Article Number | 03042 | |
| Number of page(s) | 5 | |
| Section | Environment Engineering, Environmental Safety and Detection | |
| DOI | https://doi.org/10.1051/e3sconf/201911803042 | |
| Published online | 04 October 2019 | |
Comparison of Hydrogen Specification in National Standards for China
China National Institute of Standardization, Beijing, China
* Corresponding author: yangym11thu@163.com
Hydrogen specifications for different scenarios are various. Based on national standards for China, a comparison of hydrogen specification standards is discussed in this paper, including specification standards for industrial hydrogen, pure hydrogen, high pure hydrogen, ultrapure hydrogen, hydrogen for electronic industry and hydrogen for PEM FCVs. Hydrogen purity for electronic industry is greater than that for industrial hydrogen, pure hydrogen and hydrogen for PEM FCVs. Specifications of general contaminants in hydrogen for electronic industry, including H2O, O2, N2, CO, CO2 and total hydrocarbons, are stricter than that in hydrogen for PEM FCVs. Hydrogen purity for PEM FCVs is less than that for electronic industry and pure hydrogen. However, contaminants in hydrogen for PEM FCVs are strict. Contaminants in hydrogen for PEM FCVs should include not only H2O, O2, N2, CO, CO2, Ar and total hydrocarbons, but also helium, total sulfur compounds, formaldehyde, formic acid, ammonia, halogenated compounds and particulates.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.