| Issue |
E3S Web Conf.
Volume 121, 2019
I International Conference “Corrosion in the Oil and Gas Industry”
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 4 | |
| Section | Failure Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/201912103003 | |
| Published online | 14 October 2019 | |
Failure analysis of radial bearings used in the refining of petroleum products
Peter the Great St. Petersburg Polytechnic University, 195251 Saint Petersburg, Russia
* Corresponding author: kovalev.ma@edu.spbstu.ru
The problem of premature failure of bearings is a common type of failure. In most cases, the destruction occurs due to violation of operating conditions. Since the destruction of bearings is a frequent occurrence, consideration of this special case of destruction in the future will help to avoid such problems. The object of research is the screw compressor bearings destroyed during operation. To identify the causes, a collapsed bearing was examined and a bearing that did not collapse during operation.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.