Issue |
E3S Web Conf.
Volume 121, 2019
I International Conference “Corrosion in the Oil and Gas Industry”
|
|
---|---|---|
Article Number | 04011 | |
Number of page(s) | 3 | |
Section | Materials Selection & Design | |
DOI | https://doi.org/10.1051/e3sconf/201912104011 | |
Published online | 14 October 2019 |
Improving the corrosion resistance of steels intended for use in seawater
State Scientific Center Federal State Unitary Enterprise I. P. Bardin Central Research Institute for Ferrous Metallurgy, 105005 Moscow, 23/9 Radio Street, Building 2, Moscow, Russia
* Corresponding author: igrodi@mail.ru
The results of study of influence of the chemical composition of steel, the structural condition and contamination of nonmetallic inclusions of various types on its corrosion resistance in seawater are presented in the paper. The requirements for increased-corrosion-resistance steel for marine conditions and oilfield pipelines have been compared. It has been shown that a mandatory requirement for ensuring high corrosion resistance of steels is to ensure the purity of steels from unfavorable types of nonmetallic inclusions. It has also been shown that reducing the carbon content and alloying with nickel lead to an increase in the corrosion resistance of steel.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.