| Issue |
E3S Web Conf.
Volume 124, 2019
International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 4 | |
| Section | Electromechanics and Electrical Apparatus | |
| DOI | https://doi.org/10.1051/e3sconf/201912402007 | |
| Published online | 25 October 2019 | |
A method for choosing the optimal quantity of short-circuit indicating devices to enhance power supply reliability
1
Research and development department, “Lenze”, Extertal, Germany
2
Kazan State Power Engineering University, Kazan, Russia
3
JSC “Grid company”, Kazan, Russia
4
Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Nizhny Novgorod, Russia
* Corresponding author: diana.koeppen@lenze.com
This article considers a method for solving the problem of choosing the optimal quantity of short-circuit indicating devices for providing a required reliability of the 6(10) kV distribution power grid. Compatibility of the equipment powered was taken into account. An outcome of the problem solution became a mathematical model; an optimization task, limiting and boundary conditions were formulated.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.