Feasibility study on the use of oil-well tubing in construction of intermediate support for 6-10 kV high voltage overhead power lines in the development of oilfields

¹ Tyumen Industrial University, base department of Public Joint Stock Company “Gazprom Neft”, Tyumen, Russia
² Tyumen Industrial University, Department of Design of Buildings and Structures, Tyumen, Russia

^* Corresponding author: Kosov.andrei96@gmail.com

Abstract

This article is devoted to assessing the technical effectiveness and economic feasibility of oilwell tubing in construction of intermediate supports for overhead power lines (6–10 kV) in the development of oil, gas and condensate field in the conditions of Far North. The article considers the technical possibility and economic feasibility of using the built-up cross section of the intermediate support of overhead lines consisting of two tubes welded together. The SCAD office software was used to calculate the strength of the proposed section for the design load, taking into account the impact of climatic factors. A comparative analysis of the construction cost was performed for 1 km of overhead power lines made of conventional materials and oil-well tubing. The calculations showed the feasibility of using this material for the construction of 6-10 kV overhead lines.