| Issue |
E3S Web Conf.
Volume 125, 2019
The 4th International Conference on Energy, Environment, Epidemiology and Information System (ICENIS 2019)
|
|
|---|---|---|
| Article Number | 22005 | |
| Number of page(s) | 4 | |
| Section | Industrial Information Systems | |
| DOI | https://doi.org/10.1051/e3sconf/201912522005 | |
| Published online | 28 October 2019 | |
Reliability Centered Maintenance to Determine Priority of Machine Damage Mode
1 Department of Industrial Engineering, Faculty of Engineering, North Sumatera University, Medan – Indonesia
* Corresponding author: indahrizkya@gmail.com
High machine downtime results in the production process being disrupted. The average engine breakdown in the sterilizer production is 35.66 hours/month. The corrective maintenance method has not been able to guarantee a smooth production process. This study will plan preventive maintenance activities in order to increase the reliability of production machinery and also maintain the smooth production process. The study was carried out by identifying the damage level of a sterilizer machine with the FMEA method. Based on the result of the FMEA method, maintenance planning of the production machine using the Reliability Centered Maintenance (RCM). FMEA indicates that there are 5 highest risk priority number values, namely the IGBT, Mosfet, bearing bushings, rool former and v-block components. For the maintenance planning using the RCM method, the results obtained were the Total Minimum Downtime (TMD) criteria indicates that the optimum turnover interval of Roll Former, Mosfet, V-Block, IGBT, and Bearing Bushing components is 24 days, 23 days, 25 days, 26 days, and 22 days. The recommendation of the RCM maintenance method has the potential to have a positive impact, namely a decrease in the average critical component downtime of 37,103 % and also an increase in reliability.
Key words: Machine Damage / FMEA / Reliability Centered Maintenance / Downtime Machine
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.