| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00026 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600026 | |
| Published online | 30 October 2019 | |
Study of the profile of a flat-cutting working body of a plough
FSBEI HE Kuban State Agrarian University named after I.T.Trubilin,
Krasnodar,
Russian Federation
* Corresponding author: sergey_belousov_87@mail.ru
The work is devoted to the main tillage, namely the theoretical substantiation of the profile of a flat-cutting working body of a plough. The article has a research character, which is expressed in the fact that the theoretical analysis of the method of determining the angle of sharpening of soil–processing working bodies according to the degree of gradual wear of working bodies were shown in works on this problem. There was also substantiated the type of the proposed design, there were given its description and flow of a technological process. As a result of the work done, there were obtained the theoretical dependence of the sharpening angle of working bodies and influence of the degree of wear on traction resistance of an arable unit. The conclusions set out the main results achieved so far.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.