Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00030 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/e3sconf/201912600030 | |
Published online | 30 October 2019 |
Engineering design of technological parameters of separation of seed in the upward air flow of pneumatic sorting machines
1
Federal Scientific Agroengineering Center VIM,
1-st Institutsky proezd 5,
Moscow,
109428,
Russia
2
Don State Technical University,
Gagarin Square, 1,
Rostov-on-Don,
344000,
Russia
* Corresponding author: victor250476@yandex.ru
It was showed the results of the determination the optimal parameters of the narrowing partitions installed in pneumatic channels with a vertical up air flow for cleaning seeds. The installation narrowing partitions in pneumatic channels makes it possible to increase the productivity and efficiency for cleaning seeds from difficult–to–remove impurities by no less than 20%, while the optimal ratio of the width of the partitions and the depth of the pneumatic canal sections varies from 0.3 to 0.5.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.