Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00048 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/201912600048 | |
Published online | 30 October 2019 |
Difficulties of technogenic formations roasting products processing into the portland cement clinker in the presence of a significant amount of SO3
1
Federal State Budgetary Institution of Science Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences,
620016,
Ekaterinburg,
Amundsen st., 10,
Russia
2
Federal State Autonomous Educational Institution of Higher Education «Ural Federal University named after the first President of Russia B.N.Yeltsin»,
620002,
Ekaterinburg,
Mira st., 19,
Russia
* Corresponding author: silast@mail.ru
Synthesis of the portland cement clinker in the presence of a significant amount of SO3 is difficultdue to the tricalcium silicate formation suppression. Since some technogenic formations contain a significant amount of SO3 it is hard to obtain the portland cement clinker from it. The analysis of the SO3 influence on the clinker–formation thermodynamic process allowed to reveal a number of regularities of their occurrence and to propose a method for the raw mix composition calculating and its preparation toensure a stable portland cement clinker synthesis.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.