Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00058 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/201912600058 | |
Published online | 30 October 2019 |
The calculation analysis of the geometric parameters for shock separation during threshing
FGBOU VO «Don State Technical University» (DSTU),
344000,
Rostov-on-Don,
Russian Federation
* Corresponding author: bys_ka87@mail.ru
This analysis was made on the basis of the developed methodology for the geometric parameters calculating of the working bodies, which allows changing their sizes. The described algorithm and the programdeveloped on the basis of it made it possible to calculate the position of the grains and the threshingelements depending on time with the ability to change the time interval within certain limits. Find collision parameters for various laws of grain motion and peripheral speeds of the drum, assuming that themass of the threshing element is infinitely large compared to the mass of the grain.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.