| Issue |
E3S Web Conf.
Volume 130, 2019
The 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME 2018)
|
|
|---|---|---|
| Article Number | 01039 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/201913001039 | |
| Published online | 15 November 2019 | |
Process Planning Review for Mobile Phone Remanufacturing in Indonesia
1
Mechanical Engineering Department, Petra Christian University,
Jl. Siwalankerto No.121–131,
Surabaya
60236,
Indonesia
2
Automotive Engineering Department, Coventry University,
Priory St,
Coventry
CV1 5FB,
UK
The increased number of mobile phone users has an impact on increasing electronic waste (E-Waste) without being offset by the act of product recovery management. Remanufacturing is one way to overcome this. Remanufacturing is a process to return used products to general aesthetics and operating standards.This paper aims to design a mobile phone remanufacturing process in Indonesia. Indonesia is a developing country where mobile usage is quite high. The mobile phones are chosen because it is one of the biggest e-waste takers of late. Several factories were visited in this study. This research uses a qualitative survey, which is carried out in mobile phone factories and service centers. From this research, a design has been made to remanufacture the process on mobile phones. The manufacturing plant verifies the design to obtain the input of the real constraints which will happen when the remanufacturing process is done. The steps in the process of remanufacturing are human machine interface & visual inspection, separation, disassembly, cleaning, inspection, sorting, reconditioning, reassembly, and final inspection.
Key words: E-waste / hazard and toxic waste / high-end mobile phone / product recovery
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.