Issue |
E3S Web Conf.
Volume 131, 2019
2nd International Conference on Biofilms (ChinaBiofilms 2019)
|
|
---|---|---|
Article Number | 01041 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/e3sconf/201913101041 | |
Published online | 19 November 2019 |
The Passive Surface Wave Methods for Shallow Engineering Exploration Based on the ESPAC Technology
1
Department of Modern Physics, University of Science and Technology of China, 230000 Hefei, China
2
Hefei Guowei Electronics Co., Ltd., 230000 Hefei, China
* Corresponding author: skz@ustc.edu.cn
ESPAC method is a rapidly emerging field of seismological research, which can reflect the physical properties of the Earth’s medium. In the process of using the ESPAC method, sometimes the noise of the original data is relatively large, and the raw data of each seismometer needs to be preprocessed, including operations such as de-averaging, de-trending, re-sampling, normalization, and filtering. The selection of the normalized method and the selection of the bandwidth of the filter are particularly important, and it will produce the wrong result if not handled properly. This article attempts to use the extended spatial autocorrelation (ESPAC) method to extract Rayleigh-wave phase velocity dispersion curves from the vertical component of the seismic stations’ microtremors, and proposes feasible and effective solutions to the selection of the normalized method and bandwidth of bandpass filtering.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.