E3S Web Conf.
Volume 131, 20192nd International Conference on Biofilms (ChinaBiofilms 2019)
|Number of page(s)||4|
|Published online||19 November 2019|
Stability Evaluation of a Toppling Deformed Body in Miaowei Hydropower Station
School of Earth Science and Engineering, Hohai University, Nanjing 210098, China
By analyzing the instability characteristics of deformed body after impoundment and using limit equilibrium algorithm and UDEC discrete element simulation, the failure mechanism and stability of deformed body are studied in the paper. According to the deformation degree and instability characteristics of the deformed body in different storage periods, the mechanism of instability is analyzed. Based on the regional topographic map, a two-dimensional limit equilibrium model is established to calculate the potential failure surface range and slope stability factor of QD18 deformed body under the conditions of 1314m, 1364m and 1401m water level storage. And the displacement nephogram, velocity nephogram and rock block deformation map of the deformed body under the condition of 1401 m water level are simulated by using the discrete element software, and the stress changes of each part of the deformed body after water storage are analyzed, and the failure mechanism is summarized.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.