| Issue |
E3S Web Conf.
Volume 134, 2019
The First Interregional Conference “Sustainable Development of Eurasian Mining Regions (SDEMR-2019)”
|
|
|---|---|---|
| Article Number | 01002 | |
| Number of page(s) | 8 | |
| Section | Development of Geotechnology | |
| DOI | https://doi.org/10.1051/e3sconf/201913401002 | |
| Published online | 28 November 2019 | |
Application of hydraulic press for testing powered roof prop supports
AGH University, Department of Machinery Engineering and Transport, al. Mickiewicza 30, 30-059 Krakow, Poland
* Corresponding author: kipczak@agh.edu.pl
The report presents the possibility of using press forging, used in a smelter in the crushing and forming steel ingots processes, to the operation of compression powered roof supports. Press have been redeveloped which is to construct, to produce and to exchange handles so that they can be mounted in these housing racks in an upright position. Given the capability of measured quantities, measurement procedure and methodology of the study. There were presented some exemplary results of the tests.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.