E3S Web Conf.
Volume 134, 2019The First Interregional Conference “Sustainable Development of Eurasian Mining Regions (SDEMR-2019)”
|Number of page(s)||5|
|Section||Development of Geotechnology|
|Published online||28 November 2019|
Criteria for the difficulty of working out coal-bearing zones of quarry fields
T.F. Gorbachev Kuzbass State Technical University, 650000 Kemerovo, 28 Vesennya st., Russian Federation
2 Middle East Technical University, Üniversiteler Mah., Dumlupınar Bulvarı, No: 1, 06800 Çankaya, Ankara, Turkey
* Corresponding author: email@example.com
Coal-bearing zones of open pit fields are represented by formations of coal seams from inclined to steep bedding with unstable thickness, both in dip and strike with different dip angles even within the same strata, with varying rock inter-layers and strength. In addition, most coal seams have a complex structure, including rock layers inside. In most cases, there is an uneven distribution of coal seams, and, consequently, coal reserves over the area of quarry fields. In this regard, for the analysis of quarry fields, there is a need to select criteria for assessing the complexity of coal-bearing zones for the purpose of systematizing them and choosing directions for constructing technological schemes for excavation and loading operations and mining methods.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.