| Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 7 | |
| Section | Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/201913501040 | |
| Published online | 04 December 2019 | |
Computer modeling of displacement cargo beam from cargo cart in system Mathcad
Moscow State University of Civil Engineering, Yaroslavskoye shosse, 26, Moscow, 129337, Russia
* Corresponding author: angela-1309.m@yandex.ru
Article describe processes modeling of cargo beam displacements from cargo cart in system – Mathcad u(x), tilting angle – Θ(x), maximum sagging stresses – σmax(t) and internal efforts (M(x), Q(x)) at various positions of the cargo cart; algorithm and a complex of programs for automation of modeling and graphical representation of displacements and maximum sagging stresses in system Mathcad. The proposed procedures of modeling of displacements and maximum sagging stresses in any crosssection of a cargo beam allow to reduce time and cost for performance of such calculations at least in ten times and effectively to carry out researches when cargo beam parameters, cargo cart parameters and materials change.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.