Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
---|---|---|
Article Number | 03014 | |
Number of page(s) | 4 | |
Section | Energy Conservation Renovation of Green Buildings and Existing Buildings | |
DOI | https://doi.org/10.1051/e3sconf/201913603014 | |
Published online | 10 December 2019 |
Research on Damage Identification of Grid Structure Based on Genetic Algorithm
1 School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China
2 Hebei Institute Of Architectural Design&Research CO., LTD, Shijiazhuang, Hebei, 050000, China
* Corresponding author’s e-mail: wangyu5320@163.com
This paper proposes a genetic algorithm based damage identification method for grid structures. The genetic algorithm is used to process the modal information of the structure, and the damage identification of the truss structure is carried out. The stiffness reduction factor of the structural member is used as the optimization variable. The objective function is constructed according to the frequency and vibration mode, and the fitness function is established. The binary coding method is used to improve the crossover and mutation operators. In this paper, a grid structure model is used for numerical simulation analysis and verified by experiments. In the experimental stage, the grid structure is excited by hammering method, and the response data of each node and the modal information of the structure are obtained. Numerical simulation and experimental analysis show that the damage identification method based on genetic algorithm can effectively judge the location and extent of damage.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.