Issue |
E3S Web Conf.
Volume 137, 2019
XIV Research & Development in Power Engineering (RDPE 2019)
|
|
---|---|---|
Article Number | 01052 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/201913701052 | |
Published online | 16 December 2019 |
Fuel processing in a swirl flow: numerical modelling of combustion and gasification
Czestochowa University of Technology, ul. Dąbrowskiego 69, 42-201 Częstochowa, Poland
* E-mail: robert.zarzycki@pcz.pl
This study presents the concept of a cyclone furnace for coal dust combustion and gasification under conditions of oxy-fuel combustion. A two-chamber design of the cyclone furnace allows for the separation of the process of heating, drying and devolatilization of fuel from processes of its combustion and gasification of carbon residue. The choice of process parameters helps control fuel gasification. Supplying the driving gas with a specific composition (O2, CO2) to the chamber PC1 ensures the control of temperature and composition of combustible gases obtained through gasification. These gases can be used as a fuel for power boilers and, consequently, allow for utilization of the oxy-fuel combustion technology in new or existing power boilers.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.