Issue |
E3S Web Conf.
Volume 139, 2019
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2019)
|
|
---|---|---|
Article Number | 01027 | |
Number of page(s) | 3 | |
DOI | https://doi.org/10.1051/e3sconf/201913901027 | |
Published online | 16 December 2019 |
Best overall dimensions of synchronous generator with permanent magnets for small power wind plants and micro hydropower plants
1 Tashkent State Technical University named after I. Karimova, 100095, Tashkent, Uzbekistan
2 Joint stock company Uzbekgidroenergokurulish, 100077, Tashkent, Uzbekistan
* Corresponding author: tshe100679@gmail.com
The overall dimensions of a synchronous generator with permanent magnets are determined by its main dimensions - the length lp and active part of the rotor with a diameter Dp , so the larger the air gap, the smaller the magnetic induction in it and vice versa. The force of gravity, in turn, will also depend on the air gap. The structurally incorporated unevenness of the air gap leads to an increase in the attractive force in the place of the smallest gap value, which leads to the appearance of a bending moment. As a result, the disc skews and the load on the bearings increases.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.