Automated control of distributed generation enabled power districts

Pavel Ilyushin

doi:10.1051/e3sconf/201913901035

All issues

Volume 139 (2019)

E3S Web Conf., 139 (2019) 01035

Abstract

Open Access

Issue		E3S Web Conf. Volume 139, 2019 Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2019)


Article Number		01035
Number of page(s)		5
DOI		https://doi.org/10.1051/e3sconf/201913901035
Published online		16 December 2019

E3S Web of Conferences 139, 01035 (2019)

Automated control of distributed generation enabled power districts

Pavel Ilyushin^*^,#

Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Minin str., 24, Nizhny Novgorod, Russia

^* Corresponding author: ilyushin.pv@mail.ru

Abstract

The paper presents the results of integrating distributed generation (DG) facilities in the distribution grids and internal grids of industrial enterprises. It proves such locations require many more additional relay protection and automation devices, including emergency controls; the cost of such systems is on par with that of a DG facility. The paper presents the prerequisites for equipping DG-enabled power districts with routine and emergency controls (REC). It substantiates the use of phasor measurement units as REC sensors in low- and medium-voltage grids. Presented herein are the fundamental principles behind, and functionality of, REC. The paper proves feasible using offline-computed parameters to implement a REC system for further transition to online software-based computing of steady states and transients.

^#

This work was supported by the Ministry of Science and Higher Education of the Russian Federation (agreement No. 075-15-2019-1209 of May 31, 2019. Unique project identifier RFMEFI57717X0244).

This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.