| Issue |
E3S Web Conf.
Volume 139, 2019
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2019)
|
|
|---|---|---|
| Article Number | 01057 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/201913901057 | |
| Published online | 16 December 2019 | |
Direct flow drawing equipment performance reliability and increase of its effectiveness
1 Tashkent State Technical University named after I. Karimov, Tashkent, Uzbekistan
2 Tashkent State Technical University named after I. Karimov, Tashkent, Uzbekistan
* Corresponding author: daniyar_19@yahoo.com
It is an analytic investigation of issues related to improving the efficiency and reliability of the drawing technological process, which are to be considered. After analytical efforts, a technical solution is proposed and justified. This technical solution is meant to improve the operational parameters of the cable products current-carrying conductor – reducing electrical resistance by reducing the fractional deformation and recalculating of the drawing sequence.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.