| Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
|---|---|---|
| Article Number | 06011 | |
| Number of page(s) | 4 | |
| Section | Fluid Mechanics | |
| DOI | https://doi.org/10.1051/e3sconf/201914006011 | |
| Published online | 18 December 2019 | |
Numerical investigation of a moisture wave-type vane separator
Peter the Great St.Petersburg Polytechnic University, Russian Federation
* Corresponding author: kasatkin_ivan@mail.ru
This study aims to determine the appropriate method for modeling separation processes in wave-type moisture vane separators and to analyze possible design improvements of the typical wave-type vane separator using numerical simulation methods. It discusses conditions of the secondary droplets generation phenomena. The applicability of the particle transport method for modeling the working process in wave-type vane separators is confirmed. The study explores the water droplets distribution pattern in the dispersed two-phase flow of a separator. A numerical study of the workflow in the typical steam-water separator with wave-type vanes was carried out. A dispersed two-phase flow in a separator is modelled as two separate flows. Dry saturated steam is considered as a continuous medium using the Euler method; the liquid phase is represented as a stream of water droplets described by the Lagrange method. Authors propose an option of modernization of the separator design applying three drainage channels on the path of small droplets.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.