Issue |
E3S Web Conf.
Volume 154, 2020
6th International Conference – Renewable Energy Sources (ICoRES 2019)
|
|
---|---|---|
Article Number | 01002 | |
Number of page(s) | 6 | |
Section | Biomass | |
DOI | https://doi.org/10.1051/e3sconf/202015401002 | |
Published online | 09 March 2020 |
Estimating the higher heating value of forest and agricultural biomass
Department of Fundamental Engineering, Faculty of Production Engineering, Warsaw University of Life Sciences, Nowoursynowska 164, 02-787 Warszawa, Poland
* Corresponding author: krzysztof_gornicki@sggw.pl
The objectives of study were to investigate the ash content, carbon content and the higher heating value and modelling of HHV of forest and agricultural biomass. Five types of biomass were used for the experiments: sunflower husk pellets, wood pellets, straw and hay briquettes, and forest chips. The investigated biomass properties (their average values) change: for ash content between 1.3% (woods pellets) and 7.3% (hay briquettes), for carbon content between 37.4% (forest chips) and 52.0% (wood pellets), for HHV between 14.8 kJ/kg (forest chips) and 20.1 kJ/kg (sunflower husk pellets). Two mathematical models from literature and model proposed by the authors were used to the HHV calculation. The model proposed by the authors gave the best results in determination of sunflower husk pellets HHV.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.