| Issue |
E3S Web Conf.
Volume 154, 2020
6th International Conference – Renewable Energy Sources (ICoRES 2019)
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 7 | |
| Section | Numerical Modelling and Prediction Methods | |
| DOI | https://doi.org/10.1051/e3sconf/202015404001 | |
| Published online | 09 March 2020 | |
The new design of the wood stove based on the numerical analysis and experimental research
1
Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, Poland
2
Kratki.pl, Marek Bal, Wsola, Poland
* Corresponding author: p.motyl@uthrad.pl
In Europe, especially in Poland, wood-fired stoves remain one of the most popular renewable household heating. The use of wood logs in small-scale units stoves are expected to increase substantially. The work proposes a comprehensive approach to modify the design of wood stoves with heating power up to 20 kW, including design works, simulations, and experimental research. The article also presents the numerical study of a combustion process including fluid flow, chemical combustion reaction, and heat exchange in the wood stove. The retrofit enhanced a more stable heat release from the wood stove, which increased efficiency and reduction of the harmful components of combustion.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.