Issue |
E3S Web Conf.
Volume 156, 2020
4th International Conference on Earthquake Engineering & Disaster Mitigation (ICEEDM 2019)
|
|
---|---|---|
Article Number | 02008 | |
Number of page(s) | 10 | |
Section | Geotechnical | |
DOI | https://doi.org/10.1051/e3sconf/202015602008 | |
Published online | 13 March 2020 |
Seismic microzonation of soil amplification and liquefaction for Padang City
Research Center for Geotechnology, Indonesian Institute of Sciences, Bandung, Indonesia
* Corresponding author: adrin.tohari@gmail.com
The magnitude 7.6 MW earthquake that occurred on 30 September 2009 in West Sumatera caused significant damages to buildings in the city of Padang related to the phenomenon of amplification and liquefaction. This paper presents the results of the assessment and mapping of amplification and liquefaction, carried out in the coastal area of Padang City. Mapping of soil amplification was carried out in 250 locations using the HVSR microtremor method. Meanwhile, evaluation of the potential for liquefaction was carried out in 95 locations using a cone penetration test-based method. Based on the analysis, Padang City has five seismic susceptibility zonations. Coastal areas, including the sub-districts of Koto Tangah, North Padang, West Padang, and South Padang, are located in high to very high susceptibility to soil amplification and liquefaction. These results are in agreement with the phenomenon of building damage due to amplification and liquefaction during the 2009 earthquake.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.