Issue |
E3S Web Conf.
Volume 157, 2020
Key Trends in Transportation Innovation (KTTI-2019)
|
|
---|---|---|
Article Number | 04013 | |
Number of page(s) | 7 | |
Section | Environmental and Energy Management | |
DOI | https://doi.org/10.1051/e3sconf/202015704013 | |
Published online | 20 March 2020 |
Analysis of industrial injuries and assessment of the risk of injury to railway power supply workers
Russian University of Transport (MIIT), ul. Obraztsova, d. 9, p. 9, Moscow, 127994, Russia
* Corresponding author: zavant@mail.ru
The purpose of this study is to analyze industrial injuries and assess the risk of injury to railway power supply workers based on mathematical statistics. It is shown that the level of injuries of this category of employees is at a significant level (the frequency coefficient of general injuries is higher by 2.6 times, and the frequency coefficient of fatal injuries is 5.7 times relative to the corresponding frequency coefficients in general for JSC “Russian Railways”). Based on the research results, the main causes of accidents with a fatal outcome were: poor organization and planning of work, violations of the technological process, violations in the use of personal protective equipment, lack of supervision on the part of the contractor, violation of work rules at the height, the extension of work place. The assessment of the risk of injury of contact network of electricians showed two possible types of accidents with them: electric shock and falling from a height. The probability of accidents is 0.031 and 0.051, respectively, with the number of injuries for each of the received scenarios on the five- year planning horizon being 7.85 and 12.75, respectively. The presented approach to assessing injury risks, supplemented by the method of expert assessments, will allow identifying and evaluating specific hazards at the workplace of linear level enterprises, respectively, to increase the effectiveness of developing of programs to improve working conditions and safety, and the effectiveness of implementing of tools for managing professional risks in order to reduce industrial injuries of employees of power supply divisions.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.