Issue |
E3S Web Conf.
Volume 157, 2020
Key Trends in Transportation Innovation (KTTI-2019)
|
|
---|---|---|
Article Number | 06036 | |
Number of page(s) | 8 | |
Section | Energy Efficient Building Design | |
DOI | https://doi.org/10.1051/e3sconf/202015706036 | |
Published online | 20 March 2020 |
Assessing the application efficiency of organic fiber filler for foamed fiber concrete
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Balakovo Engineering and Technology Institute (branch), 140, Chapaeva, Balakovo, 413800, Russia
* Corresponding author: emelyanova-tanya@mail.ru
The feasibility of using organic fiber filler as reinforcing fibers for non-autoclaved foamed concrete composites is discussed in the paper. The aim of the research is to analyze the factors affecting the strength and thermal insulation properties of foamed concrete and fiber concrete. Moreover, the study purpose is to obtain correlations for predicting the technological properties of thermal insulation foamed concrete and fiber concrete mixtures. The results of studying the indicators of compressive strength, bending, and thermal conductivity of a foamed fiber concrete composition with organic fiber filler are presented. The optimal sizes and amounts of organic filler made of straw are determined. The introduction of 15-30% of the total mixture mass is the most effective. In this case, the compressive strength increases by 28%, and the value of the thermal conductivity coefficient decreases by 8% compared with the control samples.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.