| Issue |
E3S Web Conf.
Volume 161, 2020
International Conference on Efficient Production and Processing (ICEPP-2020)
|
|
|---|---|---|
| Article Number | 01069 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202016101069 | |
| Published online | 15 April 2020 | |
Study of electromotive force of a new type of membraneless fuel cell operating on renewable fuel
Penza State Technological University, Russia
* Corresponding author: krtar@bk.ru
The possibility of using base metals and alloys based on them as electrodes for a new type of membraneless fuel cells operating on renewable fuel has been investigated. The phase boundary of two immiscible liquids in the ethanol-water-potassium hydroxide system plays a role of a membrane in these elements. Top phase of this fuel cell has significant alcohol content and insignificant electrolyte content, bottom phase has significant electrolyte content and insignificant alcohol content. Platinum- and ruthenium-coated titanium electrode, carbon electrode and stainless steel electrode were used as the anode. Stainless steel electrode and carbon steel electrode were used as the cathode. The possibility of using ferrous alloys as anode and cathode catalysts in this type of fuel cells is shown.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.