E3S Web Conf.
Volume 162, 2020The 4th International Conference on Power, Energy and Mechanical Engineering (ICPEME 2020)
|Number of page(s)||4|
|Section||Material Structure Design and Performance Analysis|
|Published online||07 April 2020|
Study on the Difference of Photochemical Efficiency of Sunlight Photocatalyst in Degradations Dye Aqueous RhB Solution in Different Seasons
Department of Safety Health and Environmental Engineering, National Yunlin University of Science and Technology, Yunlin, Taiwan
* Corresponding author: email@example.com
The purpose of this study is to modify TiO2 with bismuth oxide (Bi2O3) and potassium hydrogen iodate (KH(IO3)2) to research the effect of RhB degradation in natural sunlight within different seasons. The catalyst was made by fixing the mole% of I/Bi2O3/TiO2 to 2: 1: 1, 10 mg/L of RhB was the target pollutant, and compare the difference of I/Bi2O3/TiO2 modified catalysts in natural sunlight within different seasons. According to the XRD crystal phase identification, it can be seen that the characteristic peaks of the modified photocatalysts are consistent with the structures of anatase and rutile, had not be offset. At the same time, there aren’t other impurity crystal phases were found, and the photocatalysts is still retains the basic type, which means we successfully prepared the I/Bi2O3/TiO2 composite photocatalysts. The result of UV-visible analysis showed that the composite photocatalysts had the phenomenon of red-shift, and there was a second absorption wavelength in the range of visible light. That is, the energy gap will be reduced and the utilization under visible light will be increased by the addition of iodine and bismuth oxide. The pure TiO2 has no the phenomenon above. In this study, the photodegradation efficiency in 60 minutes of photocatalysts experiments under the actual solar light at summer and winter were 58.9% and 44.4% respectively. The photocatalysts still retained a good removal efficiency after five repeat photocatalytic. In other words, the photocatalyst has the characteristics of excellent durability.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.