E3S Web Conf.
Volume 164, 2020Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|Number of page(s)||8|
|Published online||05 May 2020|
Theoretical studies on the calculation of the noise of impact equipment in blacksmith shops
Don State Technical University, 1, pl. Gagarina, 344002, Rostov-on-Don, Russia
* Corresponding author: email@example.com
Most types of forging equipment relate to impact machines, during the operation of which impulse noise occurs, the levels of which at workplaces, in most cases, exceed the maximum permissible values and relate to those factors, the significance of which in some cases is greater than dustiness, high temperature, manipulation of heated workpieces. Therefore, the problem of reducing vibration and noise in the forge shops is extremely relevant and has great scientific and socio-economic significance. To solve the problem of noise reduction in forge shops, various options for reducing the noise activity of equipment have been developed/ It is possible to most effectively reduce noise by changing the material and shapes of the beds, noise-attenuating casings, oil baths for gears.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.