E3S Web Conf.
Volume 164, 2020Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|Number of page(s)||8|
|Section||Energy Efficiency in Building Construction|
|Published online||05 May 2020|
Monitoring of the framings stress-strain with strain gauges
1 Moscow State University of Civil Engineering, 129337, 26, Yaroslavskoe Shosse, Moscow, Russia
2 JSC «VPO STEEL», 2nd Khoroshevsky Prospect, d. 9, p. 2, Moscow 129337, Russia
3 National University of Science and Technology MISIS, 119049, Leninskiy prospekt, 2, Moscow, Russia,
* Corresponding author: firstname.lastname@example.org
The article describes the research methods of the stress-strain of reinforced concrete framings (piles and pylons) using embedded strain gauges. The relations of load to indirect reactive characteristics displayed by the weighing device which were obtained through laboratory tests of framings reference specimens are given. Summary tables of framings stress-strain monitoring results gained during the II Phase of construction project (after base plate concreting for piles and floor slab concreting for pylons) are included. The study of obtained results of actual framings stress will allow reducing construction material consumption through the reduction of the safety factors on reliability.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.