E3S Web Conf.
Volume 164, 2020Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|Number of page(s)||13|
|Section||Energy Efficiency in Transportation|
|Published online||05 May 2020|
Digital twin of wheel tractor with automatic gearbox
Peter the Great St. Petersburg Polytechnic University, Politechnicheskaya str., 29, St. Petersburg, 195251, Russia
* Corresponding author: firstname.lastname@example.org
This article describes the digital twin of power drive unit (engine and transmission) of 8-ton class wheel tractor with automatic gearbox. Detailed mathematical model of considered tractor power drive unit - engine with 16-speed automatic gearbox and friction shift of stages under load without breaking the power flow is given. The theoretical methods of research are based on the use of the MATLab package. With the help of fundamental package units, models of gearbox physical components are created: friction clutches, gears, shafts with the required properties, engine mathematical model, as well as model of the transmission control system. The calculation methods of the gearbox dynamic processes going on in the gear shifts using friction clutches is proposed. A feature of the mathematical model is consideration of the resistive torque, the rate of rise of switched on clutches friction torque, both during switching to the higher and lower gears. Mathematic simulation of tractor power drive unit operation under load was performed. The results of the completed calculations are presented. The possibility of using this digital model to simulate tractor operation during its main work operations is shown.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.