Prevention of corrosion fracture of agricultural equipment during storage

¹ Road Transport Department, FSBEI HE RSATU, 1, Kostychev Str., Ryazan, 390044, Russia
² Ryazan Institute (branch) of Moscow Polytechnic University, 53, Lenin Str., Ryazan, 390000, Russia
³ Academy of Law and Management of the Federal Service for the Execution of Sanctions, 1, Sennaya Str., Ryazan, 390000, Russia

^* Corresponding author: kosta066@yandex.ru

Abstract

The aim of the study is to reduce metal losses of structural elements of agricultural machines caused by atmospheric corrosion. The presents the theoretical justification and practical implementation of method of storing agricultural machinery in an open area under an active thermal cover. The object of research is the experimental design of an active heat-reflecting screen equipped with heating elements that provide an infrared radiation flux in the mid-wave range of the spectrum with a wavelength of λ = 5-20 μm. A design feature of the heat-reflecting screen is the location of heating elements relative to the agricultural machine in it. The protective effect is achieved due to the fact that when the probability of dew drops increases, the elements heating the internal surface of the heat-reflecting screen and the surface of the machine are automatically switched on, while the air, which is an optically transparent medium, does not heat up, which creates conditions excluding dew. During the tests, it was found that the use of an active heat-reflecting screen allows to ensure reliable safety of the protected machine. The possibility of local heating of the inner surface of the heat-reflecting screen and the surface of the machine without heating the entire volume of air space inside the storehouse can reduce the cost of electric energy. There is no need to preheat the airspace inside the store due to the fact that the thermal effect from the heating elements is observed immediately after being switched on.