Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
---|---|---|
Article Number | 08017 | |
Number of page(s) | 4 | |
Section | Sustainable Construction Materials and Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202016408017 | |
Published online | 05 May 2020 |
Quality control of building materials
Penza State University of Architecture and Construction, 440028 Penza, street Titova, 28, Russia
* Corresponding author: loganin@mail.ru
The purpose of the work is to assess the influence of the state of the technological process of production on the error of deciding on the suitability of the batch under control. Information is provided about the values of the error of representativeness at assessing the quality of building materials using ceramic brick as an example. It is shown that the rules for acceptance of the relevant normative documents for construction products should indicate the required number of samples for testing, taking into account the probability of an error-free forecast.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.