E3S Web Conf.
Volume 164, 2020Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|Number of page(s)||6|
|Section||Sustainable Construction Materials and Technologies|
|Published online||05 May 2020|
Influence of recrystallization annealing regime on the formation of a fine-grained structure in structural steels
Saint Petersburg State University of Architecture and Civil Engineering, 2 Krasnoarmejskaja ul.4, Saint Petersburg, 190005, Russia
* Corresponding author: firstname.lastname@example.org
The analysis of the main factors affecting the reliability and safety of welded metal structures in long-term operation is carried out. The features of obtaining a fine-grained structure due to recrystallization annealing and the main factors affecting the degree of dispersion of the formed microstructure are considered. For low-carbon steel 08ps and low-alloy steel 09G2S, optimal recrystallization annealing regimes have been developed with the aim of obtaining final structures with a given degree of dispersion, typical for real building metal structures. It was found that the degree of dispersion of the obtained microstructures depends on the heating temperature, the initial structure, and the chemical composition of the steels.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.