| Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
|---|---|---|
| Article Number | 14018 | |
| Number of page(s) | 5 | |
| Section | Materials for Energy and Environment | |
| DOI | https://doi.org/10.1051/e3sconf/202016414018 | |
| Published online | 05 May 2020 | |
Influence of dispersed fillers on properties and processability of polyvinyl chloride compositions
1 Kazan Federal University, 423812, 68/19 , 335, Naberezhnye Chelny, Russia
2 Kazan state University of architecture and construction, 420043, Zelenaya St. 1, Kazan, Russia
* Corresponding author: grr1981@outlook.com
In this reaserch, the results of filling PVC compositions are presented on the example of only two types of dispersed fillers from among industrial wastes, presented in the form of fine particles and highly porous grains:beghouse dust and expanded perlite sand. The influence of the type of filler on the value of mechanical strength was also studied by the method of measuring it under one-side pressure. It was established that when filling with ultrafine filler BP, an increase in the elastic modulus and complete “degeneration” of the forced high elasticity are observed. It seems interesting the change of the melt flow index of PVC compositions with the introduction of both fillers.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.