| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 02008 | |
| Number of page(s) | 4 | |
| Section | Environmental Engineering, Pollution Control and Prevention | |
| DOI | https://doi.org/10.1051/e3sconf/202016502008 | |
| Published online | 01 May 2020 | |
Experimental study on the basic physical properties of diesel contaminated soil
1 Changchun Sci-Tech University, College of Civil Engineering and Architecture, 130600 Changchun City, Jilin Province, China
2 Jilin Province Communication Planning and Design Institute, 130600 Changchun City, Jilin Province, China
3 Key Laboratory of Songliao Aquatic Environment, Ministry of Education, Jilin Jianzhu University, Changchun City, Jilin Province, China
* Corresponding author: hexh0605@126.com
In order to study the change of the properties of petroleum contaminated soil, the samples of diesel contaminated soil with different degrees of pollution were prepared manually, and their basic physical properties were tested through the particle test, specific gravity test and liquid plastic limit test. The results show that the diesel oil has a great influence on the particle size composition of soil, and the diesel oil makes the content of silt decrease, while the clay increase obviously; the specific gravity of soil sample decreases with the increase of oil content, and it is smaller than the proportion of unpolluted soil sample; the influence of diesel oil on the liquid-plastic limit of soil is different, the plastic limit of soil decreases with the increase of oil content, and the liquid limit increases first at a certain oil content, it reaches a peak value and then decreases.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.